34% Pool and Spa Cleaner (4 - One Gallon Jugs)
ONLY AVAILABLE FOR PURCHASE IN FOUR ONE-GALLON CONTAINERS PER BOX. This is a highly concentrated 34% solution of Certified Chemical Free H2O2 and Spring Water to be used to replace all Bromine and Chlorine-based products. This product will leave your Pool or Spa crystal clear and free of Grime. No Other Chemicals are Necessary. Ingredients: Certified Chemical Free H2O2 and Purified Spring Water. Ships within Five Days of order Placement.
Spa and Hot Tub Usage: We recommend your Spa or Hot Tub be drained and refilled before beginning your H2O2 service. To initially shock your Spa or Hot Tub, we recommend using one cup of our product per 250 gallons of water. Initially run the pump for enough time to circulate the water through the whole system. Let the water sit for 24 hours before resuming normal pumping activity. The best time to perform shock is after sunset as ultraviolet rays will slow the shock process. You may use the Spa or Hot Tub once the pumps are turned back on. To maintain the Spa or Hot Tub, we recommend using one cup of our Pool and Spa Cleaner per 500 gallons of water and keeping the water between 50 and 100 PPM. This can be accomplished by using our H2O2 Test Strips. H2O2 WILL NOT ADVERSELY INTERACT WITH OTHER SPA OR HOT TUB CHEMICALS AND WILL NOT FORM ANY DANGEROUS RESIDUAL CHEMICALS.
Pool Usage: It is not necessary to drain your Pool when using our Pool and Spa Cleaner as it will not react with chlorine or bromine products currently used in your pool and these harmful products will dissipate over time. If your current chemical ratios are correct and your pool is clear, it is not necessary to Shock your pool. If shock is required, we recommend using two gallons of our Pool and Spa Sanitizer for every 10,000 gallons of water. If you are replacing your bromine or chlorine we recommend one gallon of our Pool and Spa Cleaner for every 10,000 gallons of water. We recommend that your H2O2 levels in your pool be maintained between 30 and 70 ppm and this can be determined by using our H2O2 strips available on our site. H2O2 concentrations in the pool decrease over time due to interaction with organic pollutants and its breakdown by UV light. Therefore you will need to add H2O2 periodically to maintain sufficient concentrations. WARNING: H2O2 CAN NOT BE USED WITH A DE FILTER SYSTEM AS IT DISSOLVES THE DE POWDER! GOGGLES AND RUBBER GLOVES ARE REQUIRED WHEN USING OUR POOL AND SPA SANITIZER! SEE ALL WARNINGS ON THE CONTAINER.